Case code | D （mm） | Output | P1 （mm） | P2 （mm） | d （mm） |
M | Torque | F | Torque |
A | 87 | M8*20 | 8.5 N.m.Max | M6*8 | 4.5 N.m Max | 45±1 | 101 | 5.5 |
GENERAL TECHNICAL CHARACTERISTICS |
Reference standards : | IEC 61071-60068 |
Dielectric : | Polypropylene film |
Construction : | Extended metallized film,dry construction, non-inductive type |
Coating : | Polyester tape wrapping, UL94V-0 resin end fill |
Leads: | Threaded insert or bolt |
|
|
ELECTRICAL CHARACTERISTICS |
Operating temperature range : | - 40 to + 85 ˚C (case) |
Capacitance : | 6.8 to 220μF |
Rated Voltage : | 600 to 2200 VDC |
Tolerance : | ± 5% , ± 10% |
Dissipation Factor: | ≤2×10-3 Measured at 100 Hz and 25±5˚C |
Life Eexpectancy : | 100,000 hours at Un and 70 ˚C (Hot-spot temperature) |
|
|
TEST METHODS AND PERFORMANCES |
Dielectric Strength: | 1.5xUn for 10s at 25˚C |
Test voltage Terminal to Case : | (1.5×Un+1000)Vac,Min 3000Vac 60s |
Insulation Resistance : | ≥ 5000 s , after 1 minute of electrification at 100Vdc (25±5˚C ) |
|
|
Electrical Specifications,Ordering Codes
Cap (μF) | D (mm) | H (mm) | Ls max. (nH) | du/dt (v/μs) | Irms@40˚C @10kHz (A) | ESR@1.0kHz(mΩ) | Rth (k/w) | Ordering Code |
Un 600VDC Us 960V Ur175V |
|
100 | 87 | 41 | 25 | 40 | 80 | 0.8 | 6.8 | XDF-600-100-&A |
150 | 87 | 51 | 32 | 27 | 80 | 0.9 | 5.9 | XDF-600-150-&A |
220 | 87 | 65 | 40 | 18 | 75 | 1.1 | 5.0 | XDF-600-220-&A |
Un 700VDC Us 1050V Ur200V |
|
100 | 87 | 41 | 25 | 48 | 90 | 0.6 | 6.8 | XDF-700-100-&A |
150 | 87 | 51 | 32 | 32 | 90 | 0.7 | 5.9 | XDF-700-150-&A |
220 | 87 | 65 | 40 | 21 | 85 | 0.9 | 5.0 | XDF-700-220-&A |
Un 800VDC Us 1280V Ur225V |
|
68 | 87 | 41 | 25 | 56 | 75 | 0.9 | 6.8 | XDF-800-68-&A |
100 | 87 | 51 | 32 | 37 | 75 | 1.0 | 5.9 | XDF-800-100-&A |
140 | 87 | 65 | 40 | 25 | 70 | 1.3 | 5.0 | XDF-800-140-&A |
Electrical Specifications, Ordering Codes
Cap (μF) | D (mm) | H (mm) | Ls max. (nH) | du/dt (v/μs) | Irms@40˚C @10kHz (A) | ESR@1.0kHz(mΩ) | Rth (k/w) | Ordering Code |
Un 900VDC Us 1350V Ur250V |
|
68 | 87 | 41 | 25 | 56 | 80 | 0.8 | 6.8 | XDF-900-68-&A |
100 | 87 | 51 | 32 | 37 | 80 | 0.9 | 5.9 | XDF-900-100-&A |
140 | 87 | 65 | 40 | 25 | 75 | 1.2 | 5.0 | XDF-900-140-&A |
Un 1000VDC Us 1600V Ur275V |
|
47 | 87 | 41 | 25 | 73 | 70 | 1.0 | 6.8 | XDF-1000-47-&A |
68 | 87 | 51 | 32 | 49 | 70 | 1.2 | 5.9 | XDF-1000-68-&A |
100 | 87 | 65 | 40 | 33 | 65 | 1.5 | 5.0 | XDF-1000-100-&A |
Un 1100VDC Us 1650V Ur300V |
|
47 | 87 | 41 | 25 | 73 | 75 | 0.9 | 6.8 | XDF-1100-47-&A |
68 | 87 | 51 | 32 | 49 | 75 | 1.1 | 5.9 | XDF-1100-68-&A |
100 | 87 | 65 | 40 | 33 | 70 | 1.4 | 5.0 | XDF-1100-100-&A |
Un 1200VDC Us 1920V Ur325V |
|
25 | 87 | 41 | 25 | 90 | 60 | 1.2 | 6.8 | XDF-1200-25-&A |
35 | 87 | 51 | 32 | 70 | 60 | 1.5 | 5.9 | XDF-1200-35-&A |
50 | 87 | 65 | 40 | 50 | 55 | 2.0 | 5.0 | XDF-1200-50-&A |
Un 1500VDC Us 2400V Ur350V |
|
18 | 87 | 41 | 25 | 113 | 55 | 1.2 | 6.8 | XDF-1500-18-&A |
25 | 87 | 51 | 32 | 85 | 55 | 1.7 | 5.9 | XDF-1500-25-&A |
35 | 87 | 65 | 40 | 60 | 50 | 2.2 | 5.0 | XDF-1500-35-&A |
Un 1800VDC Us 2880V Ur400V |
|
10 | 87 | 41 | 25 | 175 | 50 | 1.5 | 6.8 | XDF-1800-10-&A |
15 | 87 | 51 | 32 | 120 | 50 | 2.0 | 5.9 | XDF-1800-15-&A |
22 | 87 | 65 | 40 | 80 | 45 | 2.5 | 5.0 | XDF-1800-22-&A |
Un 2200VDC Us 3520V Ur450V |
|
6.8 | 87 | 41 | 25 | 200 | 50 | 1.7 | 6.8 | XDF-2200-6.8-&A |
10 | 87 | 51 | 32 | 150 | 50 | 2.3 | 5.9 | XDF-2200-10-&A |
15 | 87 | 65 | 40 | 100 | 45 | 2.9 | 5.0 | XDF-2200-15-&A |
XDF - | 700 - | 100 - | &A |
Series | Voltage | Capacitance | Dimension and terminal |
& | M F | Terminal code , M for lead screw, F for insert thread |
A | Case code |
